SilverLode Controller Selection Matrix
The following matrix is a summary of the summary of the controller features.
The following features are common to all QCI controllers:
RS-232/RS-485 Binary, ASCII, Modbus® RTU
32K Memory(2000-3000 program lines)
7 TTL Level I/O (Bi-directional)
4 Analog In (10 bit single ended or 11 bit differential)
Secondary Encoder Input
SMI Port
| Controller (Datasheet) | NEMA Motor Sizes | 24V I/O | 7 TTL Level I/O Voltage | Analog In Voltage Range | Analog Out Option | Enc Out |
Open/ Close Frame |
Ethernet Option3 | SSI Enc Option |
CAN | Built In Clamp Circuit | Built In Break-outs | Drv Ebl |
| SilverNugget1 | |||||||||||||
| QCI-N2... (QCI-DS005) |
11,17,23 | 0 | 5V | 0-5V | x | Close | x4 | ||||||
| QCI-N3... (QCI-DS006) |
34 | 0 | 5V | 0-5V | x | Close | x | ||||||
SilverDust |
|||||||||||||
| QCI-D2-MG (QCI-DS004) |
11,17,23 | 0 | 3.3V2 | 0-3.3V | x | Open | x4 | ||||||
| QCI-D2-IG (QCI-DS019) |
11,17,23 | 0 | 3.3V2 | 0-3.3V | x | x | Open | x | x | ||||
| QCI-D2-IGF (QCI-DS021) |
11,17,23 | 0 | 3.3V2 | 0-3.3V | x | Close | x | ||||||
| QCI-D2-IGK (QCI-DS023) |
11,17,23 | 0 | 3.3V2 | 0-3.3V | x | Close | x | x | |||||
| QCI-D2-IG8 (QCI-DS018) |
11,17,23 | 8 | 3.3V2 | 0-3.3V | x | x | Close | x3 | x | x | x | x | x |
| QCI-D2-IGB (QCI-DS003) |
11,17,23 | 16 | 3.3V2 | 0-3.3V | x | x | Close | x | x | x | x | x |
1SilverMax® Replacement
2Convert to 5 24V Isolated In and 2 24V Open Collector Out using breakout QCI-BO-B52
3Ethernet Options include TCP/IP or Modbus TCP.
4Optional (see datasheet).